Fiber is deposited on product-specific mesh moulds under vacuum, then transferred in a synchronized cycle into the downstream system.
The forming section is where the product takes shape. Fiber is deposited on product-specific mesh moulds using vacuum, which draws water through the mould wall and shapes the wet part to the mould geometry.
Forming is one part of a synchronized production cycle: mould filling, dewatering and transfer are timed so the line runs at a steady rhythm. Because product geometry is mould-specific, the same forming platform adapts to a wide range of molded-fiber products.
Send us your target product, capacity and site conditions. We respond with the line configuration that fits.