The ECPS-600E is the compact entry model of the ECP range. Two mould stations deliver a rated reference capacity of 600 standard 30-egg trays per hour on a reduced footprint.
The ECPS-600E is engineered as a true production line rather than a standalone machine. Pulp preparation, forming, drying and control are specified together, so the line operates as one balanced system from the first day.
For producers entering molded-fiber manufacturing, the model offers a realistic operating platform at a controlled investment level, with the same engineering logic used across the entire ECP range.
The ECPS-600E suits new or localized molded-fiber production — a first production line, an entry into egg-tray manufacturing, or a compact installation where available floor area and utility infrastructure are limited.
Capacity reference: standard 30-egg tray · reference mould module 320 × 320 mm.
Recovered paper or approved fiber is mixed with water and prepared as a stable pulp suspension.
Fiber is deposited on product-specific mesh moulds using vacuum. Process water is recovered into the closed water circuit.
Wet molded products are transferred from the forming moulds into the downstream carrier system.
Products are dried to the required moisture level and proceed to collection and downstream handling.
Pulper, mixers, tanks and pulp transfer sized for the lower end of the capacity range.
Vacuum-assisted dewatering with return-water circulation and a closed-loop process-water concept.
Product-specific molds with synchronized forming and transfer into the downstream carrier system.
PLC-based sequencing, operator interface and electrical protection configured for the project.
Insulated industrial dryer concept with forced hot-air circulation, sized for the production moisture load.
The ECP platform is a molded-fiber production system. Product geometry is mould-specific, and transfer interfaces and process parameters are configured for the approved product.
The ECPS-600E produces egg trays and molded-fiber products whose geometry fits the compact mould module. Transfer interfaces and process parameters are configured per approved product.
The ECP platform is a molded-fiber production system, not a single product machine. Product geometry is mould-specific; the platform adapts.
Bespoke molded-fiber products designed around a specific geometry and use — from industrial components to tailored packaging solutions.
Learn more — Custom Molded-Fiber ProductsMolded-fiber egg trays for the safe transport and storage of eggs — the reference product of the ECP platform, produced at every capacity level.
Learn more — Molded-Fiber Egg TraysMolded-fiber trays for fruit, vegetables and food handling — ventilated, food-appropriate packaging produced on the ECP platform.
Learn more — Food and Produce TraysCustom molded-fiber inserts and protective packaging for industrial and consumer goods — engineered cushioning that replaces expanded-polystyrene and plastic inserts.
Learn more — Protective Molded-Fiber PackagingEvery line is configured for the specific project:
Rated capacities reference a standard 30-egg tray with a 320 × 320 mm mould module. Actual output depends on product geometry, pulp recipe, moisture target, drying conditions, mould configuration and the final project specification.
Need higher capacity or production redundancy? Ask GDM about multi-line project configurations.
Dual-Line Egg Tray Production EngineeringSend us your target product, capacity and site conditions. We respond with the line configuration that fits.
